Most professional hardwood refinishing lands between $3 and $8 per square foot, which puts a 400-square-foot job at roughly $1,200 to $3,200 and a 1,000-square-foot job at $3,000 to $8,000, according to NerdWallet’s U.S. cost guide. In Denver, Bob Vila reports a range of $2.20 to $6.50 per square foot for materials and labor. Where your floor falls inside that range depends on its condition, the wood species, the finish and how much of the house you are doing.

This guide shows the numbers, explains what pushes a quote up or down, and tells you what to look for on an estimate so you can compare bids on equal terms.

Leonardos Flooring Corp
Plan Your Denver Flooring Project
Leonardo’s Flooring installs hardwood floors and handles flooring projects for homes and businesses across the Denver metro area.

Explore flooring services

TL;DR

  • Expect about $3 to $8 per square foot for a full sand and refinish. Denver figures reported by Bob Vila run $2.20 to $6.50 per square foot.
  • A light screen and recoat is the cheaper path when the finish is dull but the wood is not worn through. NerdWallet lists recoating at $1 to $2 per square foot.
  • Stairs, repairs, furniture moving and trim touch-ups are often separate lines, so ask for them itemized.
  • Square footage alone does not set the price. Condition, layout, species and finish type do.
  • A well-done refinish can be one of the better value projects in a house, though results vary by home and market.

Table of Contents

What hardwood refinishing costs per square foot

The most common range in national guides is $3 to $8 per square foot. NerdWallet publishes illustrative totals by room size:

Floor area Typical total cost
40 sq ft (a small bath or closet) $120 to $320
100 sq ft (a bedroom) $300 to $800
400 sq ft $1,200 to $3,200
1,000 sq ft $3,000 to $8,000

Source: NerdWallet, updated February 2026.

Other publishers report national averages in a lower band for a typical project. The Spruce and Bob Vila both put the national average at under $2,000, with a typical range from roughly $1,100 to $2,650. The gap between those averages and the per-square-foot table above comes from job size: averages include many small rooms, and a whole main level costs more in total.

A Redfin guide published in October 2026 quotes professionals who estimate $2,000 to $3,000 for 500 square feet in average condition, with stairs and railings extra. That is a useful sanity check for a living room plus dining room.

What hardwood refinishing costs per square foot

Denver-area costs

Bob Vila’s Denver figure of $2.20 to $6.50 per square foot sits inside the national band, and the lower end tends to apply to simple, open, well-kept floors. For the same reason, a 1,500-square-foot main level in Denver, Aurora, Lakewood or Littleton can reasonably be budgeted from the national $3 to $8 range, then refined once someone has seen the floor.

Several things about Front Range homes shape the final number:

  • Age and wear. Older bungalows and 1960s ranches often have original oak that has been sanded before. How much wear layer is left matters.
  • Layout. Closets, nooks and stair landings take longer per square foot than an open room.
  • Mixed finishes. Rooms that were refinished at different times can need extra prep to blend.
  • Access. Second floors and tight entries add labor time.

No article can price your floor from a distance. What it can do is tell you whether a bid is in a realistic range. A written estimate after a walkthrough is the number that counts.

What changes the price

Sanding versus screening and recoating

The biggest decision is how deep the work goes. NerdWallet breaks the work into parts: sanding at $0.50 to $3 per square foot, staining at $1 to $3 and recoating at $1 to $2.

A full sand and refinish removes the old finish and a thin layer of wood, then applies stain (if you want a color change) and several coats of finish. It resets the floor and handles deep scratches, graying and uneven color. A screen and recoat lightly abrades the existing finish and adds a fresh topcoat. It costs less and is quicker, and it fits floors where the finish is dull but the wood is intact.

Asking a pro which of the two your floor actually needs is the single best way to avoid paying for more than the floor requires, or less than it deserves.

Wood species

Harder, denser or more figured woods are harder to sand and cost more. NerdWallet’s per-square-foot ranges:

Wood Cost per sq ft
Bamboo $2 to $6
Oak, cherry, parquet, engineered wood $3 to $5
Pine $4 to $7
Maple, mahogany $6 to $8

Engineered wood has a limited wear layer, so how many times it can be sanded depends on that layer’s thickness. A contractor who inspects a board edge or a floor vent opening can tell you quickly.

Dustless versus traditional methods

Dustless systems capture most of the sanding dust through vacuum-connected equipment. Bob Vila reports dustless refinishing typically costs $5 to $8 per square foot, against $3 to $8 for traditional sanding. If you have a finished basement, kids, or a business that stays open during the work, the cleaner process is often worth the premium.

Stain color and finish type

Keeping the natural wood tone is the simplest route. A stain color adds a step, and NerdWallet puts staining at $1 to $3 per square foot. Finish type matters too: water-based and oil-based polyurethane differ in smell, drying time and look, and your contractor should explain how each affects the schedule and the budget.

Labor

Labor is the largest slice of most invoices. Bob Vila reports labor typically runs $2 to $8 per square foot, with some contractors billing $60 to $160 per hour, and most professionals needing about five hours per 100 square feet. A crew that is fast because it is skilled is different from one that is fast because it skips steps, which is why the lowest bid is not always the best value.

Extras that often sit outside the base quote

This is where a clean-looking estimate becomes a larger final bill. The Spruce notes that repairs to damaged floors and cleanup are commonly excluded from estimates and can create additional charges. Ask whether each of these is included, priced separately or not covered:

  • Stairs. The Spruce reports stair refinishing at about $40 to $75 per tread. Redfin’s professionals likewise treat stairs and railings as extra on top of room pricing.
  • Board repair or replacement. Sanding and coating cannot fix structural problems or severely damaged boards, so replacement lines appear on the quote.
  • Gap or crack filling. Common in older homes.
  • Furniture moving. Some crews require you to empty the room, others charge.
  • Baseboard and trim touch-up. Sanders work close to the wall, and trim often needs touch-ups or removal and reinstall. The StreetEasy thread among Google’s results is a homeowner’s account of exactly this, with base molding needing paint afterward. Plan on it.
  • Squeaks and loose boards. A floor that squeaks is easiest to address before a new finish goes down. A guide to fixing squeaky floors can help you identify causes and describe the problem when a contractor visits, which makes the add-on lines on a quote easier to judge.

We handle these pieces under one roof: hardwood floor installation and refinishing, staircase treads and risers, and finishing carpentry such as baseboards and quarter-round trim. That keeps the scope in one conversation instead of three.

Why square footage is a rough guide

Most refinishers quote by the square foot, but that is only a starting point. Kurt Clason, second vice-chair of the National Association of Remodelers, told Real Simple that per-foot pricing is “a horrible price estimator” because so many variables affect the time a job takes. He also noted that small spaces such as closets or staircases can cost more per foot to refinish than large, easy-to-reach ones.

The practical result: a 40-square-foot closet is not priced like 40 square feet of living room, and a floor with 30 years of wear is not priced like one refinished five years ago. NerdWallet also reports that a difficult layout can raise the quote for a small space.

Worked examples

These are budgeting illustrations built from the published ranges above, not quotes from us.

A 500-square-foot living and dining area in average condition. Redfin’s professionals estimate $2,000 to $3,000. At NerdWallet’s per-foot range of $3 to $8, the bracket is wider, $1,500 to $4,000, and your species, finish and condition place you inside it.

A 100-square-foot bedroom. NerdWallet’s $300 to $800 range applies. At about five hours per 100 square feet, according to Bob Vila, the sanding itself is a short job, though finish coats still need drying time.

A staircase with 14 treads. At The Spruce’s $40 to $75 per tread, treads alone run $560 to $1,050, before railings, risers or spindles.

A whole main level of 1,000 square feet. NerdWallet’s $3,000 to $8,000 range applies. Moving to a dustless system at $5 to $8 per square foot would put the range at $5,000 to $8,000.

How long it takes and what to plan for

A full sand and refinish takes more than one day because finish coats need to dry between applications. Plan on several days for an average house, and talk to your contractor about when you can walk on the floor in socks and when furniture can return. Fumes and dust are a reason to arrange somewhere else to stay or at least keep pets and children out of the work area during the first stretch. A screen and recoat is quicker, which is part of why it costs less.

Schedule work around your own calendar too. If you are preparing a home for sale, finishing the floors before photos and showings is better than after.

Is refinishing worth the money?

Is refinishing worth the money?

Refinishing gives you the look of new wood without tearing out a floor you already own. For resale, CNN’s reporting on NAR-related research cited a $3,400 hardwood-refinishing project with an estimated $5,000 cost recovery, or 147% of cost. That is an estimate, and results vary with location, materials, condition and design, so treat it as a sign of strong value rather than a promise.

If your boards are structurally sound and the wood layer has life in it, refinishing is generally a sound way to refresh a home for yourself or for a sale.

Our perspective on pricing a refinish

We have spent more than ten years on floors across the Denver metro, and the best estimates we write start with a walkthrough, not a formula. Every floor has its own history: how many times it has been sanded, where the sun has faded it, whether there are pet stains near the back door.

That is why we tailor each project to your needs, budget and timeline. We would rather explain exactly what your floor needs, whether that is a screen and recoat or a full sand, than hand you a number that grows later. Honest pricing with no surprises is the standard we hold ourselves to, and our 125+ five-star reviews are the result of that approach.

When you compare bids, look at what the scope covers: sanding passes, the number of finish coats, trim, stairs and cleanup. A floor refinished right the first time looks better and lasts longer, and that is what we aim to deliver on every job.

Jim

How to compare refinishing quotes

Two bids with different totals may be describing different jobs. Line them up on the following:

  1. Scope in square feet and rooms. Are closets, hallways and stairs included?
  2. Method. Full sanding, screen and recoat, or dustless?
  3. Number of finish coats and finish type. Water-based or oil-based, and which sheen.
  4. Stain or natural. Is any color sample work included?
  5. Repairs. How are board replacement and gap filling priced, and how will you approve them?
  6. Furniture, trim and cleanup. Who does what?
  7. Schedule. How many days, and when can you return to the room?

As Clason’s comment suggests, an itemized estimate tells you more than a per-foot number. If you are budgeting a larger project that mixes refinishing with new flooring, our guide to floor installation cost factors in Denver walks through what else shapes a flooring budget.

Refinishing in Denver homes and businesses

We work with homeowners and business property managers in Denver, Aurora, Thornton, Centennial, Arvada, Highlands Ranch, Castle Rock, Lakewood, Westminster, Boulder and Littleton. A refinish for a commercial space has its own timing needs: after-hours work, short drying windows and clear walkways. Tell us how your space is used and we plan around it.

Get a refinishing quote from Leonardo’s Flooring Corp

If you are ready to put a real number on your floors, we offer hardwood floor refinishing alongside installation, subfloor preparation, staircases and trim for residential and commercial properties across the Denver metro. We look at your floor, listen to your budget and timeline, and tailor the plan to match.

Leonardos Flooring Corp

See everything we do on our services page, or reach us through leonardosflooringcorp.com to request an estimate.

FAQ

How much does it cost to refinish hardwood floors in Denver?

Bob Vila reports $2.20 to $6.50 per square foot for materials and labor in Denver, while national guides commonly cite $3 to $8. Wood species, floor condition, stairs and repairs decide where you land. A written estimate after a walkthrough gives the real figure.

Is a screen and recoat cheaper than a full refinish?

Yes. NerdWallet lists recoating at $1 to $2 per square foot, while sanding and staining add further per-foot costs. A recoat suits floors with a dull finish and intact wood. Deep scratches, stains or worn-through areas generally call for a full sand.

Does moving furniture or refinishing stairs cost extra?

Often, yes. The Spruce reports stair refinishing at about $40 to $75 per tread and notes repairs and cleanup are commonly excluded from estimates. Ask each contractor to itemize stairs, furniture moving, repairs and trim touch-ups.

How long does refinishing take?

Bob Vila reports about five hours of work per 100 square feet. A full refinish also needs drying time between finish coats, so plan for several days in an average home. Your contractor will give you a schedule for walking on the floor and returning furniture.

Sources